Belt runs to one side for a considerable distance, or the entire conveyor.
1.The belt is running off center as it comes around the tail pulley and/or through the load point.
Re-track belt, install training idlers on the return prior to the tail pulley.
2. Build up the material of the idler rollers. Clean and maintain. Install scrapers, brushes, and other
cleaning devices.
3 loading center or the belt of improper loading . Make sure load chute places and the
center of the belt. Make sure the down direction of the chute material
4 The pulleys and or the idlers are out of square with the belt center line. Adjust pulleys and
or idlers.
5.Idler stands are not focused to the belt. Adjust the stands for proper alignment.
6.The conveyor frame is not square or the system is not properly supported.
没有评论:
发表评论